PRI - LG / Goldstar Systems (2024)

Here are some tips for ISDN30 (PRI)...

After having installed the PRIB/PRIBE in an enmpty SLOT, use PGM101 and PGM103 to choose the board ID and the number (search order) of the PRIB compared to other CO line boards.

Where this LG phone system is to be installed, we use CO numbers of 8 digits. Out of these 3 digits are for the station number.

Then follow this:
1.
PGM 143 + CO line number - CO line number + button 1.
Here you enter "01" for the COLP table "01", that contain e.g. the first 5 (fixed) digits of the whole DDI number.
2.
PGM 143 + CO line number - CO line number + button 2.
Here you enter "01" for the CLIP table "01", that contain e.g. the first 5 (fixed) digits of the whole DDI number.
3.
PGM 143 + CO line number - CO line number + button 4.
This field is to be set to 2 to enable the flexible DDI converting table in PGM 231.
4.
PGM 143 + CO line number - CO line number + button 5.
This should be set to 5 for tell the system to remove 5 digits from the 8 digits received from the CO (public exchange. (DID RN, Remove Numbers).
5.
PGM 140 + CO line number + CO line number + button 1.
This has to be set to 3 for DDI numbers.
6.
PGM 146 + button 5.
This should be set to 3 as the station numbers are 3 digits long.
7.
PGM 146 + button 6.
This field should be set to:" #*** " telling the system that the first 5 digits are fixed (#) and the 3 last one can be variable.
8.
In PGM201 index 01 you enter the 5 first digits of the costumers DDI number.
9.
PGM231 - very important!
This is the flexible DDI number table...
Use this way to install the DDI table:
Button 3 - Clear DataBase.
Button 2 - Restore Default DataBase.
Button 1 - Create a DDI number.

The DDI number can have up to 9 different answer positions, and these can be answered in Day, Night or weekend "places":
The DDI-nummer(000-999) should be entered first.

With Button 1-5 you can enter the following data:

Button 1:DID name,
Button 2:Day answer position.
Button 3:Night answer position
Button 4:Weekend answer position.
Button 5:Reroute Destination.

Each of the 3 answer positions (time answer positions) can
have one of these 9 answer places:

1.Extension (station) number.
2.Grouppenumber. (PGM190/191).
3.VMIB (voice message) (00-70).
4.VMIB (voice message)with hang up (00-70).
5.Speed dialling number (2000 - 3499).
6.Internal paging(01-10).
7.External paging (1-3).
8.Internal and external paging (1-3).
9.Network number in VoIP solutions.

This will work for you!
///doktor

Thanks Doktor !

Again thanks !

Wolfi

wolfi24, hope you dont mind if i highjack your thread. its also related to PRI so i hope its ok.

how can i check the status if the D channel? i was just able to see the status of the B channels? alsohow can i disable some of the B channels?

If your system is ipLDK-100 you can set the rlevant number of B-channels in PGM101.:
Example:
SLOT 01 (F1:ID F2:DEVS)
ID : PRIBDEVS: 30
-----------------------
SLOT 01 (F1:ID F2:DEVS)
ID : PRIBDEVS: 08

The ID for the PRIB is 31, and the NPRIB has ID=42.
After programming the logical number of ports,go to program PGM 103, to actiavte your board.

///doktor

Hi bigg3rdude24 !

I Have the same doubt !

Doktor you know how check status of channel and disable or enable?

Thanks

Wolfi

Wolfi, check the last post.

///doktor

Yes ! I read, but How I see the channel Status?

Wolfi

To see the channel status, you must log on to the Remote Diagnostics program, and use the command:
bs and bc [+slot number].

///doktor

I have a better method:
Make all lines visible as CO line buttons on a DSS or LKD-30 phone.
Then you can see the status on your ISDN30 (PRI).

///doktor